The county auditor’s sales report is the most direct public source for county-level sale records in Ohio. Monroe County and Clinton County publish sale figures through their auditors’ portals, and NEO CANDO, from Case Western Reserve University, publishes residential sale-price indicators for Cuyahoga County built from Cuyahoga County Fiscal Office records. Each source uses its own definitions and reporting periods, so confirm those before comparing counties.
Where Can You Find Ohio Sale Records?
| Source | Publisher | What it publishes |
|---|---|---|
| Monroe County Sales Report | Monroe County Auditor, Ohio | Average price, sale and parcel counts, price-range statistics including medians, Export CSV |
| Clinton County sales reporting | Clinton County Auditor, Ohio | Average residential sale price for 2022 and for 2026 year to date through August 27, 2026 |
| NEO CANDO | Case Western Reserve University, Center on Urban Poverty and Community Development | Sale-price indicators for Cuyahoga County, split into single-family homes, two-family homes, three-family homes, and condominiums |
County auditor sales reports
A county auditor sales report is the portal page where you can read county-level figures before downloading anything. The Monroe County report shows an average price alongside sale and parcel counts, so you can judge how many transactions sit behind each average. Its price-range statistics include medians, which are less affected by a few very expensive sales.
Clinton County reports an average residential sale price of $183,697 for 2022 and $259,825 for 2026 year to date through August 27, 2026, according to the Clinton County Auditor (2026-10-05). These figures cover a full year and a partial year, so they are not a like-for-like comparison.
Export CSV files and raw transaction fields
The Monroe County report includes an Export CSV control, which downloads the results for your own calculations. Open the file, read the header row, and match each column to the on-screen report before calculating anything.
Two standard calculations apply to any export. An average residential sale price is the sum of residential sale prices divided by the number of residential sales. A median splits the sales into two halves, with half of prices above it and half below it (Case Western Reserve University, Center on Urban Poverty and Community Development).
NEO CANDO single-family and condominium indicators
NEO CANDO calculates residential sale-price indicators from Cuyahoga County Fiscal Office records and reports single-family homes, two-family homes, three-family homes, and condominiums separately (Case Western Reserve University, Center on Urban Poverty and Community Development). Because the categories are separate, compare single-family indicators with single-family indicators, and condominium indicators with condominium indicators, rather than mixing them into one county figure.

Choose Matching Dates and Home Types
County averages only measure the same market when every county uses the same start date, the same end date, and the same property categories. A county that reports a full calendar year and another that reports a partial year are not comparable, even if both show a single “average residential sale price.”
Align start and end dates across counties
- Set both date bounds yourself in each county’s sales tool. Monroe County’s public Sales Report includes date-range controls, so use them rather than accepting the default view.
- Confirm the selected period is displayed on the results before you export or record any figure. The Monroe report’s default results did not show a visible selected period.
- Record the exact dates used for each county next to its average, so the comparison can be reproduced later.
Separate single-family, condo, and multi-family sales
- Average prices differ by property type. NEO CANDO, which uses Cuyahoga County Fiscal Office records, distinguishes single-family homes, two-family homes, three-family homes, and condominiums as separate categories.
- Compare only the same categories across counties. If one portal’s “residential” filter includes two- and three-family buildings and another’s does not, the averages measure different stock.
- Check each portal’s classification definitions. Consistent residential classification across county portals has not been established, so do not assume two portals group property types the same way.
Handle partial-year windows
Clinton County’s auditor reports the following average residential sale prices:
| Period | Average residential sale price | Window |
|---|---|---|
| 2022 | $183,697 | Full year 2022 |
| 2026 year to date | $259,825 | Through August 27, 2026 |
These figures cover different lengths of time and different seasons, so they do not show a change in the market between the two years. To compare them, rebuild the 2022 average using the same January 1 to August 27 window, if the portal allows that date range, and compare that result with the 2026 figure.
When a window is short, the median is a useful companion to the average. The median splits sales so that half fall above it and half below, which limits the effect of a few very high or very low sales.
Which Transfers Should You Exclude?
Remove recorded transfers that do not reflect an open-market price before calculating any average. Ohio’s sales-assessment ratio studies use representative samples of open-market, arm’s-length sales from the three preceding years (Ohio Laws, 2026-03-20). Applying the same standard to a county comparison keeps family transfers, distressed sales and administrative transfers from distorting the result.
Transfers Between Relatives or Related Parties
Check buyer and seller names for family relationships, shared addresses or common ownership. Where the deed or the recorder’s record states a relationship between the parties, flag the transfer. Classification of these transfers was not verified as consistent across county portals, so do not assume a county export has already removed them.
Foreclosures, Sheriff Sales and Quitclaim Deeds
Use the deed type or transfer reason to flag transactions for review. Verify whether each transaction reflects an open-market, arm’s-length sale before including or excluding it; a quitclaim deed alone does not establish that the sale is invalid. Monroe County’s public Sales Report includes an Export CSV control, so you can download the raw list and apply your own filters rather than relying on default results.
Outliers and Nominal Consideration
Remove records with nominal consideration, meaning very low or zero recorded prices, because they rarely reflect a market sale. Review high and low values individually against property type. NEO CANDO separates single-family homes, two-family homes, three-family homes and condominiums using Cuyahoga County Fiscal Office records (Case Western Reserve University, Center on Urban Poverty and Community Development), so a multi-unit or condominium sale should not sit in the same group as a single-family sale.
| Transfer type | Signal on the record | Action |
|---|---|---|
| Between relatives or related parties | Shared family name, shared address, or stated relationship | Exclude |
| Foreclosure or sheriff sale | Foreclosure or sheriff’s deed type | Exclude or report separately |
| Quitclaim deed | Quitclaim deed type | Exclude from the market average |
| Nominal consideration | Very low or zero recorded price | Exclude |
| Unexplained outlier | Price far outside the typical range for its property type | Review, then exclude if unexplained |
Calculate Average and Median Sale Prices
The average residential sale price is the sum of residential sale prices divided by the number of residential sales, as defined by Case Western Reserve University’s Center on Urban Poverty and Community Development. The median residential sale price is the midpoint of the same sales once they are sorted from lowest to highest: half the sales sell above it and half sell below it.
| Measure | Calculation | Effect of a few very high or very low sales |
|---|---|---|
| Average | Total of residential sale prices ÷ number of residential sales | Pulled toward the extreme sales |
| Median | Middle value of the sorted sale prices | Largely unaffected by extreme sales |
Both measures depend on the sales included, so confirm the residential filter before comparing counties. NEO CANDO, for example, separates single-family homes, two-family homes, three-family homes, and condominiums, and the two figures are not interchangeable across these types. Monroe County’s public Sales Report lists both average and median prices, along with sale and parcel counts, so you can check each figure against the number of transactions behind it.
Median fits better when a county has a small number of very expensive sales that would raise the average, or when the sale count is low. A low-volume area can shift sharply with one or two transactions, as Clinton County Auditor’s notes (2026) warn. Report both the average and median with the sale count; the median reduces the influence of extreme prices but can still vary substantially in a very small sample. Average fits better when you want the arithmetic mean price per residential sale. To measure total spending across the included sales, sum their sale prices.
Compare Counties With Sale Counts
A county’s average residential sale price is the sum of residential sale prices divided by the number of residential sales, according to Case Western Reserve University’s Center on Urban Poverty and Community Development. The average does not show how many sales produced it. A figure built from a handful of transactions and one built from many can look identical on a summary page, so each county average should be read with its sale count.
Recording Each Average With Its Count
Monroe County’s public Sales Report shows the average price alongside sale and parcel counts, along with date-range controls and median statistics. Record these fields for each county:
| Field | What to record | Why it matters |
|---|---|---|
| County | Name as published by the county auditor | Keeps the source of each figure traceable |
| Date range | Start and end dates shown in the report | Averages covering different periods are not comparable |
| Average residential sale price | Sum of residential sale prices divided by the number of residential sales | The central figure being compared |
| Sale count | Number of residential sales in the same date range | Shows how much the average rests on |
| Parcel count | Parcels listed in the same report | Kept separate from sales; the link between parcels and sales is not established, so record both |
| Median sale price | Middle value of the sale-price distribution, with half of prices above and half below | A cross-check when a few high or low sales skew the average |
If a county portal does not publish a sale count, its average cannot be weighed against other counties. Note the gap rather than estimating the count.
Setting a Minimum Sale Count Before Ranking
Set a minimum sale count before ordering counties by average price. Choose the threshold yourself and state it in the article, then list counties below it separately, without a rank.
Check that counts are built the same way across counties. Consistent residential classifications, arm’s-length filters, and treatment of multi-parcel transactions have not been established across county portals, so a count of 500 in one county may not mean the same thing as 500 in another.
Side-by-Side Layout
Place one county per row, and use one date range for the whole table. Clinton County’s averages illustrate the problem: it reports $183,697 for 2022 and $259,825 for 2026 year to date through August 27, 2026, according to the Clinton County Auditor, Ohio (2026). These periods differ in length and coverage, so they cannot share a column in a single ranking.

Look Beyond the Countywide Average
A countywide average is the sum of residential sale prices divided by the number of residential sales, according to Case Western Reserve University’s Center on Urban Poverty and Community Development. That one figure can hide large differences between the taxing district, neighborhood and property type that make up the county. Clinton County Auditor (2026) warns that countywide averages conceal substantial differences among taxing districts.
Taxing district differences
Each county average blends all of its taxing districts into one number. If districts differ in price level, the countywide figure may not closely describe any one of them. Compare districts with each other, using the same date range and filters, rather than measuring a single district against the countywide line.
Low-volume districts and small samples
Clinton County Auditor (2026) cautions that a low-volume district can be highly sensitive to one or two transactions. In a district with few sales, a single unusually priced sale moves the average much more than it would in a district with many sales. Read each figure next to its sale count.
| Measure | How it is calculated | Limitation in small districts |
|---|---|---|
| Average | Sum of sale prices divided by number of sales | One high or low sale shifts the result |
| Median | Middle value, with half of sales above and half below | Rests on a few sales when the count is very low |
| Sale count | Number of residential sales in the period | Shows how many transactions the figure rests on |
Monroe County’s public Sales Report shows average price, sale and parcel counts, and price-range statistics including medians, with date-range controls and a CSV export. Use the export to check the count and the median beside the average. Default results in that report can include zero-dollar transfers and do not show a selected period, so set the date range and confirm the residential filter before comparing figures.
Neighborhood figures versus countywide totals
A countywide average mixes property types. NEO CANDO, which uses Cuyahoga County Fiscal Office records, reports single-family, two-family, three-family and condominium sales separately. A blended average that includes condominiums and multi-family buildings does not describe a typical single-family home. Compare neighborhood figures only with figures for the same property type and period.
Check Data Limits Before Choosing
County sales records show what residential properties sold for over a given period. They do not show what a typical home costs in a specific neighborhood, what assessed values say, or whether the latest months are complete. Check these three limits before comparing counties.
Ohio sales-assessment ratio studies serve assessment purposes
Ohio’s assessment ratio studies exist for assessment and equalization. According to Ohio Laws (2026), the statute specifies representative samples of open-market, arm’s-length sales from the three preceding years, filtered by county auditors, and permits appraisals when sales are insufficient. These studies check how closely assessments track the market. They are not a price index for buyers, so they should not be used to estimate home prices in a county.
Assessed values differ from actual sale prices
An assessed value is an estimate used to calculate property tax. It is not the price a home sold for. A county’s assessed-value totals cannot substitute for sale-price records when comparing what homes cost. Use the sale-price fields for prices and assessed values only for tax questions.
Averages hide local spread and small samples
An average residential sale price is the sum of sale prices divided by the number of sales, so a few high or low transactions can move it. The median, which splits the sales into two halves, is less affected by extremes. Clinton County Auditor (2026) cautions that countywide averages conceal substantial differences among taxing districts, and that low-volume districts can be highly sensitive to one or two transactions.
Recency and reporting lag
Records cover only sales already reported, so the most recent months may be incomplete. Clinton County Auditor (2026) publishes a full-year 2022 average and a 2026 average through August 27, 2026. These cover different lengths, so the difference between them does not measure price change. Before reading any county portal, confirm the date range, and confirm that non-sale transfers and non-residential records are excluded. Monroe County’s public Sales Report includes date-range controls and an Export CSV option, which let you set matching periods across counties.
| Limit | What it means | What to check |
|---|---|---|
| Assessment purpose | Ratio studies support tax equalization | Use sale records, not ratio studies, for prices |
| Assessed vs. sale price | Assessed values are tax estimates | Compare sale-price fields directly |
| Averages | Mask differences between taxing districts | Check district level and number of sales |
| Recency | Recent months may be partial | Match date ranges across counties |